Ready for a relaxing bath but tired of seeing limescale everywhere? Let’s get that bathtub sparkling again with these cleaning bathtub tips. Enjoying a bath should be a serene moment at home, and we’ve got the advice to make it shine.
How to Clean Your Bathtub Without Scrubbing?
If your bathtub isn’t too grimy, you can clean it without scrubbing. For those tougher limescale spots, you might need to break out the sponge. Here are tips for all types of bathtubs:
- Acrylic Bathtub: Mix bicarbonate of soda with white vinegar. Pour the mix and let it sit. Rinse with your showerhead. If it doesn’t work, the grime is too stubborn for a no-scrub solution.
- Cast Iron Bathtub: Mix half a cup of soda crystals with 3 litres of water to make a paste. Apply on the stains, let it sit, then rinse.
- Enamel Bathtub: Use a sponge with turpentine and coarse salt. If you’re new to turpentine, it’s cheap and easy to find. Follow safety guidelines carefully and don’t mix with citric acid. Once applied, rinse thoroughly.
For a particularly yellowed bathtub, apply sodium percarbonate all over. Heat white vinegar and pour it over the percarbonate. Use a non-abrasive sponge to avoid damage. Most tips can be applied to the rest of your bathroom.
How to Clean a Heavily Limescaled Bathtub?
Use citric acid to tackle persistent limescale. Follow the instructions on the product label. If there are none, mix 3 tablespoons of citric acid with 1 litre of boiling water. For larger tubs, increase to 2 litres of water. Use citric acid carefully: wear gloves and goggles to prevent burns. After application, let it sit for several minutes, then rinse thoroughly and scrub any remaining limescale.
For taps, spray a mix of white vinegar and water. Heated vinegar works better. Let it sit, then scrub your taps.
Use a lemon to clean your bath screen. Cut it in half and rub it over the surface. Rinse with cold water and dry with a microfiber cloth. Remove water daily with a squeegee to prevent limescale build-up. If that’s too much effort, consider investing in an anti-limescale bath screen.
How to Whiten Bathtub Enamel?
Whitening bathtub enamel doesn’t take much time. Spray white vinegar all over the bathtub and let it sit for a few minutes. Scrub with a non-abrasive sponge. To make the enamel shine, use a cloth soaked in turpentine. For minor dirt, a damp magic sponge will do. Lemon or black soap can also help.
A few tips to avoid damaging your bathtub’s enamel daily:
- Don’t overuse bath salts as they damage enamel.
- Avoid anti-limescale products, use the natural tips in this article.
- Steer clear of strong detergents or abrasive powders.
- Pour white vinegar once a week and rinse after five minutes.
How to Repair and Clean a Bathtub with Damaged Enamel?
If your bathtub has lost its enamel, don’t worry. Here are some tips to help. Repair small chips or scratches with specific products. Start by sanding rust marks around the chips. Use a brush to apply cold enamel paint or enamel filler, easily available. Follow the product recommendations to ensure it’s suitable for your bathtub.
Apply a bathtub repair kit for heavily damaged tubs. These kits are designed for well-worn bathtubs. Ensure the product is suitable for your bathtub and follow the instructions carefully. You can also hire a professional for repairs.
With these tips for cleaning a bathtub, you now know how to maintain and clean your bathtub. If you’re short on time, Wecasa offers a home cleaning service. These steps for cleaning a bathtub will ensure it stays in top condition for your relaxation time.
